Conversion method
Charge per volume. Denominator prefixes are raised to the indicated power; signed charge is supported.
µC/m³ = x × 1000000
10 C/m³ = 10000000 µC/m³.
| C/m³ | µC/m³ |
|---|---|
| 1 | 1000000 |
| 5 | 5000000 |
| 10 | 10000000 |
| 25 | 25000000 |
| 50 | 50000000 |
| 100 | 100000000 |
What volume charge density describes
Volume charge density ρ is charge per unit volume, used for charge spread through a region: plasmas, electrolytes, space charge in vacuum tubes and the depletion regions of semiconductors. It is measured in coulombs per cubic meter (C/m³), and Gauss's law links it to the field through ∇·E = ρ / ε₀.
In a semiconductor the fixed charge is often given as a number of ionised dopant atoms per cm³. Each carries one elementary charge, so 10¹⁶ atoms/cm³ (10²² per m³) is ρ = 1602.176634 C/m³.
- Volume units scale with the cube of length: 1 C/cm³ is 1,000,000 C/m³, and 1 C/L is 1,000 C/m³.
- Multiply by a volume to get total charge: 2 C/m³ throughout 0.5 m³ is 1 C.
Unit definitions and sources
Charge per volume. Denominator prefixes are raised to the indicated power; signed charge is supported.
Every definition below was checked against the cited sources on 2026-09-20 (AI-assisted check).
| Unit and system | Use | Definition | Relationship |
|---|---|---|---|
| Coulomb per meter³ (C/m³); si | Common units | Coulomb per meter³: base (c-m) = value × 1. Common use: Volume Charge Density. | Exact definition; numerical display may be rounded |
| Microcoulomb per meter³ (µC/m³); si | Common units | Microcoulomb per meter³: base (c-m) = value × 1e-06. Common use: Volume Charge Density. | Exact definition; numerical display may be rounded |
| Coulomb per centimeter³ (C/cm³); si | Specialist units | Coulomb per centimeter³: base (c-m) = value × 1000000. Common use: Volume Charge Density. | Exact definition; numerical display may be rounded |
| Nanocoulomb per meter³ (nC/m³); si | Specialist units | Nanocoulomb per meter³: base (c-m) = value × 1e-09. Common use: Volume Charge Density. | Exact definition; numerical display may be rounded |
| Coulomb/cubic inch (C/(in³)); other | Specialist units | coulomb/cubic inch = 61023.74409473229 c-m, derived from the component SI/customary definitions. Common use: Volume Charge Density. | Exact definition; numerical display may be rounded |
Sources: NIST: SP 811 Appendix B.8: conversion factors; BIPM: SI prefixes
Precision of volume charge density conversions
All 5 volume charge density units convert through Coulomb per meter³ (C/m³). 5 have an exact defined relationship to the base unit and 0 are conventional or measured values. Results and the tables on this page come from the same engine, so a table value can be checked against the converter directly.
Standard display shows up to six decimal places, switching to scientific notation for very large or small values. Calculation uses JavaScript binary floating point independently of display rounding, so extra digits are not a claim about measurement accuracy. Each unit lists its own source; a citation records where the definition comes from, not an independent review. See Conversion methodology for the review and correction process.