Linear Charge Density Converter

Charge per length. Convert coulomb per meter, microcoulomb per meter and 3 more linear charge density units with exact definitions and sources.

Linear Charge Density converter

Calxy core engine

Scientific notation is supported, for example 1e6 or 2.5e-3. Thousands separators such as 1,000 are fine.

Popular shortcuts

C/m to µC/m

Exact definition

1,000,000 µC/m

1 C/m = 1,000,000 µC/m

About these units

Charge per length. Denominator prefixes are raised to the indicated power; signed charge is supported.

Coulomb per meter: checked against the cited source 2026-09-20 (AI-assisted check).

Microcoulomb per meter: checked against the cited source 2026-09-20 (AI-assisted check).

Formula and calculation

Standard linear transform
µC/m = x × 1000000
µC/m = 1 × 1000000 = 1,000,000 µC/m

Base transformation: 1 C/m = 1 C/m; 1 µC/m = 0.000001 C/m. Ratio: 1000000.

Accuracy

Relationship: exact definition. Display: rounded to up to 6 decimal places, with scientific notation for very small or large values. More digits do not mean greater measurement accuracy; factors involving π or recurring fractions are approximations.

References for the selected units and their conversion factors.

Result in every supported unit5 units
UnitResult
Coulomb per meter (C/m)1
Microcoulomb per meter (µC/m)1000000
Coulomb per centimeter (C/cm)0.01
Nanocoulomb per meter (nC/m)1000000000
Coulomb/inch (C/(in))0.0254

Conversion sources and methodology · Unit systems, SI prefixes and symbols

Conversion method

Charge per length. Denominator prefixes are raised to the indicated power; signed charge is supported.

µC/m = x × 1000000

10 C/m = 10000000 µC/m.

C/m to µC/m
C/mµC/m
11000000
55000000
1010000000
2525000000
5050000000
100100000000

What linear charge density describes

Linear charge density λ is charge per unit length, used when charge is spread along something long and thin: a wire, a charged filament, a transmission line or the edge of a plate. It is measured in coulombs per meter (C/m).

For a long straight line of charge, the electric field at distance r is E = λ / (2π ε₀ r). A line carrying 1 nC/m produces 17.975104 V/m at 1 m, and the field falls off as 1/r, not 1/r² as for a point charge.

  • Only one length dimension is involved, so C/m to C/cm divides by 100 and C/m to C/mm divides by 1,000.
  • Multiply by a length to get total charge: 2 nC/m along 3 m of wire is 6 nC.

Sources: NIST: 2022 CODATA recommended constants

Unit definitions and sources

Charge per length. Denominator prefixes are raised to the indicated power; signed charge is supported.

Every definition below was checked against the cited sources on 2026-09-20 (AI-assisted check).

Linear Charge Density: definitions used by this converter
Unit and systemUseDefinitionRelationship
Coulomb per meter (C/m); siCommon unitsCoulomb per meter: base (c-m) = value × 1. Common use: Linear Charge Density.Exact definition; numerical display may be rounded
Microcoulomb per meter (µC/m); siCommon unitsMicrocoulomb per meter: base (c-m) = value × 1e-06. Common use: Linear Charge Density.Exact definition; numerical display may be rounded
Coulomb per centimeter (C/cm); siSpecialist unitsCoulomb per centimeter: base (c-m) = value × 100. Common use: Linear Charge Density.Exact definition; numerical display may be rounded
Nanocoulomb per meter (nC/m); siSpecialist unitsNanocoulomb per meter: base (c-m) = value × 1e-09. Common use: Linear Charge Density.Exact definition; numerical display may be rounded
Coulomb/inch (C/(in)); otherSpecialist unitscoulomb/inch = 39.37007874015748 c-m, derived from the component SI/customary definitions. Common use: Linear Charge Density.Exact definition; numerical display may be rounded

Sources: NIST: SP 811 Appendix B.8: conversion factors; BIPM: SI prefixes

Precision of linear charge density conversions

All 5 linear charge density units convert through Coulomb per meter (C/m). 5 have an exact defined relationship to the base unit and 0 are conventional or measured values. Results and the tables on this page come from the same engine, so a table value can be checked against the converter directly.

Standard display shows up to six decimal places, switching to scientific notation for very large or small values. Calculation uses JavaScript binary floating point independently of display rounding, so extra digits are not a claim about measurement accuracy. Each unit lists its own source; a citation records where the definition comes from, not an independent review. See Conversion methodology for the review and correction process.

References

Last updated . Results are estimates for informational purposes only.