Surface Charge Density Converter

Charge per area. Convert coulomb per meter², microcoulomb per meter² and 3 more surface charge density units with exact definitions and sources.

Surface Charge Density converter

Calxy core engine

Scientific notation is supported, for example 1e6 or 2.5e-3. Thousands separators such as 1,000 are fine.

Popular shortcuts

C/m² to µC/m²

Exact definition

1,000,000 µC/m²

1 C/m² = 1,000,000 µC/m²

About these units

Charge per area. Denominator prefixes are raised to the indicated power; signed charge is supported.

Coulomb per meter²: checked against the cited source 2026-09-20 (AI-assisted check).

Microcoulomb per meter²: checked against the cited source 2026-09-20 (AI-assisted check).

Formula and calculation

Standard linear transform
µC/m² = x × 1000000
µC/m² = 1 × 1000000 = 1,000,000 µC/m²

Base transformation: 1 C/m² = 1 C/m²; 1 µC/m² = 0.000001 C/m². Ratio: 1000000.

Accuracy

Relationship: exact definition. Display: rounded to up to 6 decimal places, with scientific notation for very small or large values. More digits do not mean greater measurement accuracy; factors involving π or recurring fractions are approximations.

References for the selected units and their conversion factors.

Result in every supported unit5 units
UnitResult
Coulomb per meter² (C/m²)1
Microcoulomb per meter² (µC/m²)1000000
Coulomb per centimeter² (C/cm²)0.0001
Nanocoulomb per meter² (nC/m²)1000000000
Coulomb/square inch (C/(in²))0.00064516

Conversion sources and methodology · Unit systems, SI prefixes and symbols

Conversion method

Charge per area. Denominator prefixes are raised to the indicated power; signed charge is supported.

µC/m² = x × 1000000

10 C/m² = 10000000 µC/m².

C/m² to µC/m²
C/m²µC/m²
11000000
55000000
1010000000
2525000000
5050000000
100100000000

What surface charge density describes

Surface charge density σ is charge per unit area, used for charge on a surface: capacitor plates, conductor surfaces, electrodes and charged films. It is measured in coulombs per square meter (C/m²).

Next to a large flat sheet of charge the field is E = σ / (2 ε₀); just outside a conductor it is σ / ε₀. A sheet with 1 µC/m² gives 56470.45333 V/m, independent of distance while the sheet is large compared with that distance.

  • Area units scale with the square of length: 1 C/cm² is 10,000 C/m², and 1 C/mm² is 1,000,000 C/m².
  • Multiply by an area to get total charge: 5 µC/m² over a 0.02 m² plate is 0.1 µC.

Sources: NIST: 2022 CODATA recommended constants

Unit definitions and sources

Charge per area. Denominator prefixes are raised to the indicated power; signed charge is supported.

Every definition below was checked against the cited sources on 2026-09-20 (AI-assisted check).

Surface Charge Density: definitions used by this converter
Unit and systemUseDefinitionRelationship
Coulomb per meter² (C/m²); siCommon unitsCoulomb per meter²: base (c-m) = value × 1. Common use: Surface Charge Density.Exact definition; numerical display may be rounded
Microcoulomb per meter² (µC/m²); siCommon unitsMicrocoulomb per meter²: base (c-m) = value × 1e-06. Common use: Surface Charge Density.Exact definition; numerical display may be rounded
Coulomb per centimeter² (C/cm²); siSpecialist unitsCoulomb per centimeter²: base (c-m) = value × 10000. Common use: Surface Charge Density.Exact definition; numerical display may be rounded
Nanocoulomb per meter² (nC/m²); siSpecialist unitsNanocoulomb per meter²: base (c-m) = value × 1e-09. Common use: Surface Charge Density.Exact definition; numerical display may be rounded
Coulomb/square inch (C/(in²)); otherSpecialist unitscoulomb/square inch = 1550.0031000062002 c-m, derived from the component SI/customary definitions. Common use: Surface Charge Density.Exact definition; numerical display may be rounded

Sources: NIST: SP 811 Appendix B.8: conversion factors; BIPM: SI prefixes

Precision of surface charge density conversions

All 5 surface charge density units convert through Coulomb per meter² (C/m²). 5 have an exact defined relationship to the base unit and 0 are conventional or measured values. Results and the tables on this page come from the same engine, so a table value can be checked against the converter directly.

Standard display shows up to six decimal places, switching to scientific notation for very large or small values. Calculation uses JavaScript binary floating point independently of display rounding, so extra digits are not a claim about measurement accuracy. Each unit lists its own source; a citation records where the definition comes from, not an independent review. See Conversion methodology for the review and correction process.

References

Last updated . Results are estimates for informational purposes only.